Using BIM software is not the same as working in BIM
TL;DR. Most companies that say they work in BIM use BIM software. Far fewer manage information the way BIM requires. The gap shows up as rework, files that lose data between design and manufacturing, and teams that cannot keep work consistent from one project to the next. Closing it is not a software purchase. It takes a shared understanding of the process, defined information requirements for every handover, open formats used properly, and quality checked at more than one level.
What BIM is, and what it is not
This article draws on two TylkoTALK webinars I organised this autumn, with Rita Baltasar, Lead Digital Engineer at Hinkley Point C and PhD researcher at UWE Bristol, and Parveen Sharma, CEO of The BIM Engineers, a team of around 1,200 BIM engineers.
BIM is not a 3D model and not a piece of software. It is a way of managing information about an asset across its whole life - who needs what, when, in which format, and who checks it. ISO 19650 describes that process. IFC is the open format that lets different tools share the result.
Understanding is improving, slowly. In the NBS Digital Construction Report 2025, seven in ten UK construction professionals say they use BIM - the same share as in 2023, and broadly flat since 2018. Only 15% now describe BIM as “3D models with data”, down from a quarter. But only around one in three connect it with working to BS EN ISO 19650 (NBS, November 2025).
That matches what practitioners see on site. Many people work in BIM without knowing it. Many say they know BIM when they do not. The workflow is in use; the shared language behind it is missing.
Why the industry still works the old way
Because the old way still works well enough. If a process delivers, there is little pressure to change it - until a problem appears that it cannot solve. BIM became a UK requirement in 2016, and ten years on some companies still avoid open standards.
Three things hold people back:
- Habit. “If it works, why change?” is still the default answer.
- Fear of new tools. People try new software, feel overwhelmed and go back to what they know.
- Missing foundations. Without the process vocabulary, new tools only digitise old habits.
The price is rework. It is highest in off-site manufacturing, where a mistake found in the factory costs more to fix than the same mistake found on site.
Where the gap shows: the handover to manufacturing
The clearest example is the move from a construction model to a factory. Construction exchanges models in IFC (ISO 16739-1). Manufacturers work with STEP (ISO 10303). Between the two, information disappears.
On Hinkley Point C, a single IFC-to-STEP conversion took 14 to 16 hours, and files still came back corrupted or missing geometry. The cause was a construction habit: sending the whole model, while the export removed exactly what the factory needs.
| What the factory needs | What a basic IFC-to-STEP export keeps |
|---|---|
| Element identifier (IFC GUID) | Lost |
| Material | Lost |
| Tolerances (e.g. rebar to BS 8666) | Lost |
| Assembly sequence | Lost |
| Holes, with position and depth | Often annotated by hand |
| Geometry and element name | Kept |
Two lessons follow. First, define what each handover needs instead of sending everything. Second, use the right format. STEP AP242 can carry product and manufacturing information (PMI), such as tolerances, inside the model (NIST). AP214 is the minimum. Legacy IGES or mesh formats such as STL only add work.
Tools are starting to close this gap. offBIM, developed by Rita Baltasar in her PhD research and a finalist in the buildingSMART openBIM Awards 2026, writes identifiers, materials, tolerances and assembly order into AP242. The same gap is what the Digital Product Passport addresses from the manufacturer’s side.
Open standards do not interoperate on their own
Supporting IFC on paper is not the same as exchanging the information your project needs. Open standards are still implemented unevenly across software, and commercial incentives do not always favour them - a vendor has little reason to let a cheaper tool do the job of an expensive one. That is why neutral bodies such as buildingSMART International matter.
Clients feel it too. Owners and project managers who only need to view and comment on models are often asked to buy full licences.
Our advice is simple: test before you commit. Check which IFC version and which exchange a tool supports, run it on your own data, and only then write it into the BIM Execution Plan.
How large teams keep information consistent
Consistency at scale comes from structure, not heroics. At The BIM Engineers, units of around 250 engineers each work for one region and its standards. Quality is checked at three levels, and each level checks something different:
| Level | Who checks | What they check |
|---|---|---|
| 1 | Package team | Their own package only - e.g. door names, sizes, materials |
| 2 | Project manager | Coordination across all disciplines |
| 3 | Audit team | Compliance with standards, codes, the EIR and the BIM Execution Plan |
The auditor does not check spelling. The package team does not check ducts. Each level is responsible for what it can actually see - and nobody is the only safeguard.
Why AI makes understanding more important, not less
AI is arriving faster than BIM did. More than two in five UK construction professionals now use it daily, up from fewer than one in ten five years ago (NBS, October 2025).
Anyone who has worked with an AI assistant knows it keeps asking for context and decisions. That is the point: the decisions are still yours. If you understand how information should be structured and exchanged, you notice when the output is wrong - including when AI is wrong with confidence. If you do not, AI only produces mistakes faster.
Training is part of digital transformation, not an extra. Good teams expect people to need it and run it regularly, rather than treating a gap in knowledge as a failure.
Where to start
- Build the shared vocabulary first - process, roles and information exchange - before buying more tools.
- Define the information requirements for every handover, especially to manufacturing.
- Test your software’s open-format exports on your own data.
- Split quality control into levels, each with its own owner.
FAQ
Is using Revit or Archicad the same as working in BIM?
No. Modelling software is one part of BIM. Working in BIM means managing information according to a defined process, such as ISO 19650, and exchanging it in open formats such as IFC.
Why is openBIM adoption so slow?
Existing processes still work well enough, new software feels risky, and many people use BIM tools without the foundations. NBS data shows BIM use in the UK has been flat since 2018.
What is the difference between IFC and STEP?
IFC (ISO 16739-1) is the open format for building and infrastructure models. STEP (ISO 10303) is the open format manufacturers use for product data.
Which STEP format should I send to a manufacturer?
STEP AP242, which can carry tolerances and other manufacturing information inside the model. AP214 is the minimum.
Does AI reduce the need for BIM training?
No. AI speeds up the work, but the decisions stay with people. Without understanding the process, you cannot tell when the output is wrong.
For step one, the shared starting point is the buildingSMART Foundation certification. We described what it covers in a separate article, and Tylko Academy prepares candidates for the exam held on the first Wednesday of every month.
Sources
- TylkoTALK webinars: with Parveen Sharma, 29 October 2026; with Rita Baltasar, 12 November 2026.
- NBS: Digital Construction Report 2025
- NBS: BIM comes of age in construction (November 2025)
- NBS: AI adoption surges as digital anxiety grips the construction sector (October 2025)
- NIST: On migrating ISO 10303 PMI models to a common core

